D-Link DFE-2600 User Manual page 98

Dual-Speed Stackable Hub Web-based Management User's Guide
Group Role
mary-master, backup-master, or slave.
Hardware Revision
in this Hub.
Status Tells whether the Hub is up (online and working) or down.
Last Operation Status Change
Hub. A status change occurs when the Hub goes online or offline.
Isolated/ Reconnected Group This is an option to isolate or reconnect
the Hub to the hub stack.
Out-of-Band/ Console Configuration
Clicking on the word Console which will appear on the representation of the
hub stack if a console is present, allows the Hub
figured. The diagnostic port can be set to Console (in-band) for VT-100
and terminal emulation which may be necessary for basic configurations and
initial setup, or to out-of-band management which enables the hub to be
managed using SNMP via the diagnostic port.
86
The role of the Hub within the stack, either pri-
The version of the repeater hardware board used
Time of the last status change for the
Web-based Network Management
diagnostic port to be con-