Mini Ygdai Plug-In System Compatible I/O Card Operations; Backing Up An I/O Card - Yamaha AW4416 Manual Supplement

Mini YGDAI plug-in system compatible
Plug-In 1 and Plug-In 2 pages have been added to dis-
play parameters for I/O cards compatible with the
Mini YGDAI plug-in system. To access the Plug-In 1
page, press the [AUX7] [F5] key. To access the Plug-
In 2 page, press the [AUX8]
The content and operation of the Plug-In 1/Plug-In 2
pages will depend on the type of I/O card that is
installed. The screen shown here is of a prototype
Y56K DSP plug-in card manufactured by WAVES Cor-
poration. For details refer to the manual for your I/O
card.
For details on the types of I/O cards compatible with
the Mini YGDAI plug-in system, please contact a
Yamaha information center, distributor, or the follow-
ing Internet URL.
http://www.aw4416.com/
Tip!
In the Plug-In 1/Plug-In 2 pages you can use BACKUP
and RESTORE as additional functions. For details refer
to the sections below.

Backing up an I/O card

If one or two I/O cards compatible with the MiniYG-
DAI plug-in system are installed, you can use two
memory banks (MEM.BANK 1 / MEM.BANK 2) to
store I/O card settings.
Scene changes on the AW4416 are linked to changes
of the I/O card settings, and when you store the scene
(or save the song), settings of the I/O card installed in
option slot 1 will be automatically backed-up to
MEM.BANK 1, and settings of the I/O card installed in
option slot 2 will be automatically backed-up to
MEM.BANK 2.
However if necessary, you can also perform the
backup operation manually. This method allows the
settings of the I/O card in option slot 1 to be backed
up to MEM.BANK 2 (or vice versa). The procedure is
as follows.
I/O card operations
[F5] key.
Version 2.0 Manual Supplement
1
Press the [AUX7] key
key [F5] key) to access the Plug-In 1
page (or Plug-In 2 page).
Access the Plug-In 1 page if you want to back up
the I/O card installed in option slot 1, or access
the Plug-In 2 page if you want to back up the I/O
card installed in option slot 2.
2
Hold down the [SHIFT] key and press the
[F1] (Backup) key.
A popup window will appear, allowing you to
back up the I/O card settings.
3
Move the cursor to either the MEM.BANK
1 or MEM.BANK 2 button, and press the
[ENTER] key.
Select either MEM.BANK 1 or MEM.BANK 2 to
choose the backup-destination memory bank (1
or 2). If the memory bank already contains data,
the bank name will be displayed. If it does not
contain data, the display will indicate "NO
DATA!"
The bank name is assigned automatically according to
the type of I/O card installed. It is not possible for
you to edit this name.
4
To execute the backup, move the cursor to
the OK button and press the [ENTER] key.
The settings of the I/O card will be saved in the
current song.
[F5] key (or [AUX8]
21