Troubleshooting (Faq) - Yamaha DSP5D Installation Manual

Network driver for dsp5d

Hide thumbs Also See for DSP5D:

Owner's manual (409 pages)

Brochure & specs (14 pages)

Installation manual (10 pages)

Table Of Contents

Table of Contents

When controlling the DSP5D from your computer via Ethernet, the DSP5D does not operate

correctly.

• Is the Ethernet cable connected correctly?

Refer to the

"Connection of computer and the

• Is the DME-N Network Driver set up appropriately?

Refer to the "Setup" section.

• Did you enter an appropriate IP address of the DSP5D?

The IP address of the DSP5D can be checked in the PREFERENCE 2 screen on the PM5D console if the DSP5D is cascade-

connected to the PM5D. If the DSP5D is used alone, refer to "Connect the DSP5D to your computer via Ethernet" of the

DSP5D owner's manual and "Console Setup" of the PM5DV2/DSP5D Editor owner's manual. If you are connecting the DSP5D

to your computer in a one-to-one connection, we recommend that you make the following initial settings.

IP address

Gateway address

Subnet mask

For details on settings when connecting to a LAN, refer to the DSP5D Editor installation guide. The IP address of the DSP5D

must not conﬂict with that of any other device on the network.

• Did you enter the correct MAC address of the DSP5D?

The MAC address of the DSP5D can be checked in the PREFERENCE 2 screen on the PM5D console if the DSP5D is

cascade-connected to the PM5D. If the DSP5D is used alone, it can be searched in the "Advanced Settings" dialog box when

the IP address is known. If you don't know the IP address of the DSP5D, initialize the DSP5D internal memory and search the

IP address "192.168.0.129" in the "Advanced Settings" dialog box.

• Is the computer network setup appropriately?

Conﬁrm the network setup by following the procedures in the

If you are connecting the DSP5D to your computer in a one-to-one connection, we recommend that you make the following

settings.

IP address

Subnet mask

Default gateway

For details on settings when connecting to a LAN, refer to the DSP5D Editor installation guide.

The IP address of the computer must not conﬂict with that of any other device on the network.

• Are the settings of the DSP5D and peripheral network devices (including switching hubs) appropriate?

Refer to the relevant owner's manuals for the DSP5D and peripheral network devices (including switching hubs) for details.

• Have you selected an appropriate ports in the DSP5D Editor and Studio Manager?

Select the Device Name entered in the "DME-N Network Driver" dialog box as the input/output port settings of DSP5D Editor

and Studio Manager.

• Are you using the latest DME-N Network Driver?

The latest driver can be downloaded from the Yamaha website

DME-N Network Driver Installation Guide for DSP5D