Connecting External Devices - Yamaha RX-V571 Easy Setup Manual

4

Connecting external devices

TV
Audio output
(Digital optical)
OPTICAL
O
HDMI
HDMI OUT jack
ARC
HDMI OUT
ARC
HDMI OUT
DOCK
COMPONENT
VIDEO
P
R
P
B
VIDEO
Y
MONITOR OUT
L
R
O
OPTICAL
OPTICAL COAXIAL COAXIAL OPTICAL
OPTICAL COAXIAL
(CD) (TV)
(TV)
AV 1 AV 2 AV 3 AV 4 AV 5 AV 6
AV 1 AV 2
AV 4
AV4 (OPTICAL)
jack
NATURAL SOUND AV RECEIVER RX-V571
YPAO MIC
Turn on the
unit
PHONES USB
SILENT CINEMA iPod/iPhone
HDMI input HDMI output
BD/DVD player
HDMI HDMI
HDMI HDMI
(General model only)
Set the switch position of the
VOLTAGE SELECTOR according to
your local voltage using a straight slot
screwdriver. Voltages are AC 110-120/
220-240 V, 50/60 Hz.
HDMI
HDMI 1
HDMI1 jack
(BD/DVD)
HDMI1
(BD/DVD)
HDMI 1 HDMI 2 HDMI 3 HDMI 4 HDMI 5
SURROUND BACK/
ANTENNA
R FRONT L CENTER R SURROUND L R
AM FM
75Ω
MONITOR OUT
AV
OUT
AUDIO SPEAKERS
The unit (rear)
INFO MEMORY PRESET FM AM TUNING
SCENE
BD
TV CD RADIO
DVD
VIDEO AUX
INPUT PROGRAM
TONE CONTROL STRAIGHT
HDMI IN VIDEO
The unit (front)
VOLTAGE
SELECTOR
SURROUND BACK/
BI-AMP
R L
SINGLE
110V-
120V
220V-
240V
VOLTAGE
SELECTOR
SUBWOOFER
Plug into an
electric outlet
BI-AMP
L
SINGLE
SUBWOOFER
DIRECT
VOLUME
L AUDIO R
1
Connect external devices to the unit.
1 Connect a BD/DVD player to the unit with an HDMI
cable.
If the BD/DVD player are connected to a TV directly
with an HDMI cable, disconnect the cable from the
TV and connect it to the unit.
2 Connect the TV to the unit with an HDMI cable.
3 Connect the TV to the unit with an optical cable.
This connection enables the TV audio to be played
through the unit. If your TV supports the Audio
Return Channel function (ARC), this connection is
unnecessary.
4 Connect the power cable to an electric outlet.
• (General model only) The VOLTAGE SELECTOR on the
rear panel of this unit must be set for your local voltage
BEFORE plugging the power cable into the AC wall outlet.
Improper setting of the VOLTAGE SELECTOR may cause
damage to this unit and create a potential fire hazard.
• For connecting other devices, such as a radio antenna,
refer to "SETUP" in the "Owner's Manual."
2
Turn on the TV, BD/DVD player and the unit.
3
Confirm that the video images input from
BD/DVD player is displayed on the TV
screen.
a Change video input source for the TV to the unit.
b Press HDMI1 to select "HDMI1" as the input source.
If the video image input from BD/DVD player is
displayed on the TV screen, all settings have been
completed.
Go to the next page, and refer to "Optimizing the
speaker settings automatically (YPAO)."
5