D-Link AirPremier AG DWL-AG530 Manual page 11

Getting Started (continued)
Setting up a Wireless Infrastructure Network
For a typical wire-
less setup at home
(as shown here),
please do the
following:
7
You will need broadband Internet access (a Cable or DSL-subscriber line
into your home or office).
Consult with your Cable or DSL provider for proper installation of the modem.
Connect the Cable or DSL modem to your broadband router. (See the
Quick Installation Guide included with your router).
Install the D-Link AirPremier
an available PCI slot on your desktop computer.
(See the Quick Installation Guide included with the network adapter).
Install the D-Link DWL-AG660 Wireless Cardbus Adapter into a laptop
computer.
(See the Quick Installation Guide included with the DWL-AG660).
If you wish, you may connect a computer that is equipped with an Ethernet
network adapter (such as a DFE-528TX) to the router also.
A RADIUS server is optional. Connect a RADIUS server to your network
to use all the features of WPA. (Without a RADIUS server you can still use
the WPA Pre-Shared Key mode.) RADIUS Authentication can also be
provided by another service provider over the Internet and remote to your
network site.
2
6
TM AG DWL-AG530 Wireless PCI Adapter into
11
3
DI-784
DWL-AG660
with Laptop PC
1
4
DWL-AG530
5