D-Link DCS-1000 Manual page 79

D-link systems manual web camera dcs-1000, dcs-1000w

Hide thumbs Also See for DCS-1000:

Table of Contents

I/O Schematic Diagram

voltage 5V.

Note:

Through the Web Configuration in the Trigger section, you must first enable

the trigger function. Please refer to the Web Configuration section for de-

tailed information.

1. When connecting a device to the Input connector, the device must be a passive

component without voltage and electrical current.

2. When connecting other devices through the Output connector, please make

sure the maximum current of DC 5V, 100mA is strictly observed.

3. Any failure of the above two points might cause serious damage to the camera.

Warning

Table of Contents

Dcs-1000w