Cleaning And Maintenance; Troubleshooting; Technical Data - Haier I-MASTER 5 Series User Manual

GB
• Release the ON/OFF button to switch off.
• Remove the blades, then pour out the food.
Reverse the above procedure to disassemble
the unit.
5. Cleaning & Maintenance
CAUTION: Make sure that the main body is
unplugged from the mains power supply and
that the blades have stopped turning before
attaching or removing any accessory.
Disassemble all of parts before washing.
DO NOT immerse the main body into water or
any other liquid, clean with a damp sponge or
cloth and wipe dry.
Handle the blades with care - they are
extremely sharp.
Please remove the sticker on the glass bowl
before washing.
Following parts/tools can be put in the
dishwasher to clean. [Fig. 8]
• Cover
• Cover sealing
• Upper blade
• Blade shaft
• Glass bowl
• Non-slip pad
All parts must be completely cleaned and dry
before being stored.
Assemble the appliance with the blades, cover
and main body in position.
Store the appliance in the box or in a clean, dry
place well out of the reach of children.

6. Troubleshooting

1. Motor doesn't start or blades don't rotate.
Check that the bottom of motor head is clean
and there is no food blocking connection when
placing on the glass bowl.
There is too much food in the glass bowl.
The main body has overheated. Unplug and wait
approximately 10 minutes before using again.
Ensure the main body is securely placed on the
Cover.
Check the plug is securely inserted into the
mains power supply.
2. Food is unevenly chopped.
Either you are chopping too much food at one
time, or the pieces are too big. Try cutting the
food into smaller <2cm pieces of even size and
processing smaller amounts per batch.
3. Food is chopped too fine or is too watery.
The food has been over processed. Use brief
pulses or process for shorter time. Let blades
stop completely between pulses.

7. Technical data

Electrical connection
Power
8. Important information
Haier Spares and Consumables
Always replace parts with genuine Haier spares.
These are available from your local Haier dealer
or direct from Haier. When ordering parts
always quote your model number.
Quality
Haier's factories have been independently
assessed for quality. Our products are made
using a quality system which meets the
requirements of ISO 9001.
Your Guarantee
The guarantee conditions for this appliance are
as defined by our representative in the country
in which it is sold. Details regarding these
conditions can be obtained from the dealer from
whom the appliance was purchased. The bill of
sale or receipt must be produced when making
any claim under the terms of this guarantee.
4
220-240V~50/60Hz
550W