Page 13
• Please note that Yamaha cannot accept any liability for any losses CAUTION: resulting from improper use or unauthorized modification of the TO REDUCE THE RISK OF ELECTRIC SHOCK, product.
Page 14
Water warning CAUTION • Do not use this product in damp or wet conditions, such as a bathroom or rainy outdoor location. • Do not place on this product any containers (such as vases or medicine bottles) that contain liquids. These precautions alert you to the possibility of physical If liquid spills into the product, fire, electrical shock or damage to the injury to yourself or others.
Page 15
FCC requirements. Modifications not expressly approved by Yamaha may void your authority, Otherwise, fire, electrical shock or damage to the product may be caused. granted by the FCC, to use the product.
USEFUL FEATURES This unit allows you to: ◆ Enjoy clear audio sound wirelessly using Bluetooth ◆ Use the remote control of this unit to operate a Yamaha technology (see page 13). CD player (see page 7). ◆ Listen to FM and AM radio stations (see page 15).
CONTROLS AND FUNCTIONS Front panel BAND 5 MEMORY (power) Turns this unit on, or sets it to standby mode. Stores the current radio station as a preset when TUNER is selected as the input source (see page 16). 2 FM MODE 6 BAND Changes the FM radio wave reception mode (stereo or monaural) when TUNER is selected as the input...
Page 18
CONTROLS AND FUNCTIONS A PHONES jack For connecting headphones. Press SPEAKERS A/B so that the SP A/B indicators (see page 4) turn off before you connect your headphones to the PHONES jack. B SPEAKERS A/B Turns on or off the speaker set connected to the SPEAKERS A and/or SPEAKERS B terminals on the rear panel each time the corresponding button is pressed (see page 12).
CONTROLS AND FUNCTIONS Front panel display 1 PRESET indicator 4 TUNED indicator Lights up or blinks when using the preset function (see Lights up when this unit is tuned in to an FM or AM page 16). station with a strong signal. 2 MEMORY indicator 5 SLEEP indicator Lights up or blinks when registering radio stations as...
CONTROLS AND FUNCTIONS Rear panel 1 ANTENNA terminals 6 SPEAKERS terminals Used to connect the radio antennas (see page 11). Used to connect speakers (see page 9). 2 Power cable 7 VOLTAGE SELECTOR For connecting this unit to an AC wall outlet (see (Only for General model) page 11).
CONTROLS AND FUNCTIONS Remote control 4 Input selector buttons Select the input source you want to listen to. The input source names correspond to the names of the SLEEP connection jacks on the rear panel. 5 TREBLE –/+ LINE 1 LINE 2 LINE 3 Increases or decreases the high frequency response.
Page 22
Starts/pauses playback BAND Switches the radio tuner band. Note MEMORY Yamaha does not guarantee the operation of all Bluetooth devices. Stores the current radio station as a preset (see page 16). INFO Only for Europe model: Switches information shown on the front panel display.
CONTROLS AND FUNCTIONS Using the remote control ■ Installing batteries ■ Operation range Change all batteries if you notice the operation range of Point the remote control at the remote control sensor on the remote control narrows. Before inserting new this unit and remain within the operating range shown batteries, wipe the battery compartment clean.
CONNECTIONS Connecting speakers and source components Make sure to connect L (left) to L, R (right) to R, “+” to “+” and “–” to “–”. If the connections are faulty, no sound will be heard from the speakers, and if the polarity of the speaker connections is incorrect, the sound will be unnatural and lack bass.
Page 25
CONNECTIONS ■ OUT jacks ■ Bi-wire connection • The OUT jacks output audio signals of the currently Bi-wire connection separates the woofer from the selected input (except when LINE 3 is selected). combined midrange and tweeter section. • Volume level, tone control and balance settings do not A bi-wire compatible speaker has four binding post affect the OUT jacks.
CONNECTIONS Connecting the FM/AM antennas Connecting power cable Connect the supplied FM/AM antenna to this unit. Plug the power cable into an AC wall outlet after all other Fix the end of the FM antenna to a wall, and place the AM connections are complete.
PLAYBACK Playing a source When finished listening, press A (power) to set this unit to standby mode. Press A (power) to turn this unit on again. • You can also use the buttons or knobs on the front panel if SLEEP A (power) they have the same or similar names as those on the...
Notes If you are asked to enter a password, enter the numerals “0000”. • Yamaha does not guarantee all connections between this unit and Bluetooth device. • This unit can be paired with up to 8 Bluetooth devices. When pairing with the 9th device has succeeded, pairing data for the device with the oldest connection date will be deleted.
In the Bluetooth settings of the Bluetooth device, turn Bluetooth on. From the Bluetooth connection list of the Bluetooth device, choose this unit (R-S202 Yamaha). The Bluetooth connection will be established, and the front panel display of this unit will indicate “CONNECTED”.
FM/AM TUNING You can tune in to a radio station by specifying its frequency or selecting from registered radio stations. Notes • The radio frequencies differ depending on the country or region where this unit is being used. Front panel display illustrations shown in this section are based on Europe model.
Page 31
FM/AM TUNING Press TUNER to select the tuner as the input Tune in to the desired FM/AM station. See page 15 for tuning instructions. source. Press MEMORY. Press BAND to select the FM band. “MANUAL PRESET” is displayed briefly on the front panel display, and then the preset number to Press MENU to enter the Option menu.
Page 32
FM/AM TUNING ■ Recalling a preset station ■ Clearing a preset station You can recall preset stations that were registered by Follow the steps below to clear a preset station. presetting automatically or manually. SLEEP SLEEP LINE 1 LINE 2 LINE 3 LINE 1 LINE 2...
Page 33
FM/AM TUNING Press ENTER again to confirm. Press TUNER to select the tuner as the input “CLEARED” is displayed on the front panel display. source. Then, another preset station is shown on the front panel display. When there is no more preset station, Press BAND to select the FM/AM band.
SETTING THE OPTION MENU FOR EACH INPUT SOURCE The Option menu allows you to configure various settings for each input source and recall those settings automatically when an input source is selected. Press one of the Input selector buttons to select the desired input source.
Refer to the chart below if this unit does not function properly. If the problem you are experiencing is not listed below or if the instructions below do not help, set this unit to standby mode, disconnect the power cable, and then contact the nearest authorized Yamaha dealer or service center. ■ General...
Page 36
The batteries are weak. Replace all batteries. The remote controls for both this unit and Change the remote control ID of the Yamaha AV This unit responds to — the AV receiver have been programmed receiver. For more information, please refer to the the remote control for with the same remote control code.
Page 37
TROUBLESHOOTING Problem Cause Remedy page The Bluetooth connection of this unit with Perform Bluetooth connection operations again. No sound is produced the Bluetooth device is disconnected. or the sound is interrupted during This unit and the Bluetooth device are too Move the Bluetooth device closer to this unit.
® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Yamaha This equipment complies with FCC radiation exposure limits set Corporation is under license. Other trademarks and trade names are forth for an uncontrolled environment and meets the FCC radio those of their respective owners.