Table of Contents
Advertisement
HANDLE CONTROL BOX
1.
Press the power ON/OFF and menu switch to display the
main menu.
2.
On "Control" menu, press "Steer indication..." and select.
REMARK
"Steer indication..." menu is displayed only when the Align-
ment file has been selected.
For the selecting method of Alignment, see "METHOD
FOR SELECTING AN ACTIVE ALIGNMENT FILE".
3.
On "Steer Indication" screen, select or input the following
parameters.
•
"Point of interest :"
Select the blade edge position to display the Steer In-
dication.
•
"Alignment feature :"
Select the position where the polyline as a landmark
for the Steer Indication is in the Alignment data.
•
"Additional steer offset :"
Input the distance to offset the target position from the
position which has been set on "Alignment feature :".
•
"Override machine direction"
This function is disabled for this machine. Select
"None".
4.
Press "Ok".
ADJUST WEAR AMOUNT
For adjustment of wear amount of the blade, see "METHOD FOR INPUTTING WEAR AMOUNT OF BLADE
EDGE AND TRACK SHOE".
DOZING CONTROL
For the dozing mode setting, see "DOZING MODE SETTINGS".
ADJUST BLADE ELEVATION
For adjustment of blade elevation, see "ADJUST BLADE ELEVATION".
CALIBRATE BLADE POSITION
Perform calibration related to the blade.
Calibration of pitch rod
For details, see "INPUT PITCHING ROD LENGTH".
Machine calibration step A
For machine calibration step A, contact your Komatsu distributor.
If you select it, press "Cancel" and return to the main window.
Machine calibration step B
For machine calibration step B, contact your Komatsu distributor.
If you select it, press "Cancel" and return to the main window.
CONTROL MENU
AJD02633
AJD02634
4-47
Advertisement
Chapters
Table of Contents
