Safety Notes - Siemens SIMATIC NET ANT793-8DK Compact Operating Instructions

Industrial wireless lan antenna
Hide thumbs Also See for SIMATIC NET ANT793-8DK:
Table of Contents

Advertisement

Available languages

Available languages

Control cabinet bushings with suitable cables are available for IWLAN devices located in a control cabinet. You will find
detailed information in the catalog IK PI.
2

Safety notes

WARNING
To avoid injury and damage, note the instructions in the operating instructions before commissioning.
WARNING
Danger due to lightning strikes
Antennas installed outdoors must be within the area covered by a lightning protection system.
Make sure that all conducting systems entering from outdoors can be protected by a lightning protection potential
equalization system.
When implementing your lightning protection concept, make sure you adhere to the VDE 0182 or IEC 62305 standard.
NOTICE
Improper use
The device (and its components) may only be used for the application described in the catalog or the operating instructions.
Combinations with devices or components of other manufacturers are permitted it they have been approved by Siemens.
Correct and safe operation of the device is guaranteed only when it is transported, stored, set up, installed, used and
maintained according to the recommendations.
Antenna ANT793-8DK
A5E03484060-06, 08/2023
15

Advertisement

Table of Contents
loading

Table of Contents