Front Decoration Cover - Lenovo ThinkCentre M70a Gen 2 Hardware Maintenance Manual

Front decoration cover

Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove the following parts in order, if any:
• "Computer stand" on page 64.
• "Rear cover" on page 67.
• "Optical drive" on page 68.
• "Optical drive holder" on page 70
• "System board shield" on page 71.
• "VESA mount bracket cover" on page 73.
• "VESA mount bracket" on page 76.
• "Hard disk drive and bracket" on page 77.
• "M.2 solid-state drive" on page 81.
• "Memory module" on page 85.
• "System fan" on page 88.
• "Heat sink" on page 89.
• "Bump cover" on page 92.
• "Microprocessor" on page 94.
• "Serial connector module" on page 94.
• "Cable cover" on page 96.
• "Wi-Fi card" on page 98.
• "Cover presence switch (intrusion switch)" on page 99.
• "E-Privacy button board (M90a Gen 2)" on page 101.
• "Card reader" on page 102.
• "System board" on page 103.
• "Internal speakers" on page 106.
• "I/O brackets (M90a Gen 2)" on page 108.
• "Integrated camera and microphone module" on page 111.
• "Main frame" on page 113.
Replacement procedure
M70a Gen 2
116
M70a Gen 2 and M90a Gen 2 Hardware Maintenance Manual