Table of Contents
Advertisement
EMMA-(A01, A02)
User Manual
●
●
●
●
Working at Heights
●
●
●
●
●
●
●
●
●
●
●
●
Issue 05 (2024-01-19)
When moving a heavy object, be aware of the workbench, slope, staircase,
and slippery places. When moving a heavy object through a door, ensure that
the door is wide enough to move the object and avoid bumping or injury.
When transferring a heavy object, move your feet instead of turning your
waist around. When lifting and transferring a heavy object, ensure that your
feet point to the target direction of movement.
When transporting the equipment using a pallet truck or forklift, ensure that
the tynes are properly positioned so that the equipment does not topple.
Before moving the equipment, secure it to the pallet truck or forklift using
ropes. When moving the equipment, assign dedicated personnel to take care
of it.
Choose sea or roads in good conditions for transportation. Do not transport
the equipment by railway or air. Avoid tilt or jolt during transportation.
Any operations performed 2 m or higher above the ground shall be supervised
properly.
Only trained and qualified personnel are allowed to work at heights.
Do not work at heights when steel pipes are wet or other risky situations
exist. After the preceding conditions no longer exist, the safety owner and
relevant technical personnel need to check the involved equipment. Operators
can begin working only after safety is confirmed.
Set a restricted area and prominent signs for working at heights to warn away
irrelevant personnel.
Set guard rails and warning signs at the edges and openings of the area
involving working at heights to prevent falls.
Do not pile up scaffolding, springboards, or other objects on the ground under
the area involving working at heights. Do not allow people to stay or pass
under the area involving working at heights.
Carry operation machines and tools properly to prevent equipment damage or
personal injury caused by falling objects.
Personnel involving working at heights are not allowed to throw objects from
the height to the ground, or vice versa. Objects shall be transported by slings,
hanging baskets, aerial work platforms, or cranes.
Do not perform operations on the upper and lower layers at the same time. If
unavoidable, install a dedicated protective shelter between the upper and
lower layers or take other protective measures. Do not pile up tools or
materials on the upper layer.
Dismantle the scaffolding from top down after finishing the job. Do not
dismantle the upper and lower layers at the same time. When removing a
part, ensure that other parts will not collapse.
Ensure that personnel working at heights strictly comply with the safety
regulations. The Company is not responsible for any accident caused by
violation of the safety regulations on working at heights.
Behave cautiously when working at heights. Do not rest at heights.
Copyright © Huawei Digital Power Technologies Co., Ltd.
1 Safety Information
10
Advertisement
Table of Contents
