Connection - Sony RM-930 Service Manual

Connector Panel
THHTITTTTHTTH
—@ CAMERA connector
———€} MONITOR OUT connector
MONITOR OUT:
") DC IN connector
The two screw holes at the bottom are for attaching the RM-930 in
a rack. Consult your Sony dealer for the use of the screw holes.
@ CAMERA connector © DC IN connector
Connect to the DC IN/REMOTE connector of the DXC- Connect to the DC OUT connector of the CMA-D1/D1CE
930/930P video camera with the supplied CCMC cable. camera adaptor with a CCDC cable (not supplied).
@® MONITOR OUT connector Note |
Connect to the video input connector of a monitor. Only one equipment can be connected to the DC OUT
The connector outputs the picture (composite video signal) connector of the CMA-D1/D1CE due to the power
from the camera. consumption.
CONNECTION
Before connecting, turn off the power of each equipment.
to video input
to VIDEO OUT
to DC IN/REMOTE
CCMC cable
(supplied)
CMA-D1/D1CE
CCDC cable
to AC IN
to a wall outlet
Length of the connecting cabies
The CCDC sable| a : BeeetC Si CCMC cable length CCDC cable length to be used
ienet Cae ee Cpe es OG rable 5 m (16 ft), supplied Max. 25 m (83 ft)
10 m (33 ft) Max. 10 m (33 ft)
25 m (83 ft) Max. 10 m (33 ft)
1-2(E) a0