Table of Contents
Advertisement
ELECTRIC WALL OVEN INSTALLATION INSTRUCTIONS
NOTE TO ELECTRICIAN: The armored cable leads
supplied with the appliance are UL-recognized for
connection to larger gauge household wiring. The
insulation of the leads is rated at temperatures
much higher than temperature rating of
household wiring. The current carrying capacity
of the conductor is governed by the temperature
rating of the insulation around the wire, rather
than the wire gauge alone.
Where local codes permit connecting the
appliancegrounding conductor to the neutral
(white) wire (US Only) (see Figure 3):
1.
Disconnect the power supply.
2.
In the junction box: connect appliance and power
supply cable wires as shown in Figure 3.
Cable from Power Supply
White Wire
(Neutral)
Red
Wires
Ground Wire
(Bare or Green Wire)
Cable from appliance
Figure 3
3-WIRE GROUNDED JUNCTION BOX
If oven is used in a new branch circuit installation
(1996 NEC), mobile home, recreational vehicle, or
where local codes DO NOT permit grounding
through the neutral (white) wire, the appliance
frame MUST NOT be connected to the neutral wire
of the 4-wire electrical system (see Figure 4):
1.
Disconnect the power supply.
2.
Separate the green (or bare copper) and white ap-
pliance cable wires.
3.
In the junction box:
connect appliance and power supply cable wires as
shown in Figure 4.
Black
Wires
Junction
Box
White Wire
(Neutral)
U.L.-Listed Conduit
Connector (or CSA listed)
Cable from Power Supply
Ground Wire
Red
Wires
Ground Wire
(Bare or Green
Wire)
Junction Box
Cable from appliance
4-WIRE GROUNDED JUNCTION BOX
Model and Serial Number Location
The serial plate is visible when the door is opened.
When ordering parts for, or making inquires about
your oven, always be sure to include the model
and serial numbers and a lot number or letter from
the serial plate on your oven.
Serial Plate Location
5
White Wire
Black
Wires
White Wire
U.L.-Listed
Conduit Connector
(or CSA listed)
Figure 4
Figure 5
Advertisement
Table of Contents
