Advertisement
Befoir® IR®qyestEimg Help
Problem
Remedy
An alarm tone sounds when
vou oress (TALK).
° You are too far from the base unit.
Move closer and try again,
o Place the handset on the base unit
and try again,
o Plug in the AC adaptor.
An alarm tone sounds
continuously while using the
handset.
o Move closer to the base unit quickly,
or the call will be terminated within 60
seconds.
o Plug in the AC adaptor.
The unit does not work.
o Check the setting (p. 6-8).
o Charge the battery fully.
° Clean the charge contacts and charge
again.
Static, sound cuts in/out, fades.
Interference from other
electrical units.
© Set the handset and the base unit
away from electrical appliances,
o Move closer to the base unit.
° Raise the base unit antenna,
o Press (ch) to change the channel.
The unit stops working during
operation.
o Place the handset on the base unit
and unplug the AC adaptor to reset.
Plug in, then try again,
o Re-insert the handset battery within 5
minutes and try again.
The handset does not ring.
o The ringer volume is set to OFF.
Press 1 LOUD/RINGER 1 when the
TALK/BATT LOW indicator light is off.
You cannot store a phone
number in memory.
o You cannot store a number while the
unit is in the talk mode,
o Do not pause for over 30 seconds
while storing.
While storing a phone number,
the unit starts to ring.
o To answer a call. Dress ItalkI.
The program will be canceled; store
the number again.
iHANDSET LOCATOR] does not
function.
o The handset is too far from the base
unit or is engaged in an outside call.
18
Advertisement
