Table of Contents
Advertisement
Memory Presettings
(continued)
3*5 4
1
2
Manual memory presetting
Stations can be freely preset to any desired channel.
A maximum of 28 broadcast stations can be memorized.
Carry out the steps 1 and 2 of "Standard Operations" on page
20
.
1
Press the band select button to select the
desired band ("FM". "MW" or "LW").
2
Press the appropriate tuning button to tune to
the desired broadcast.
(Refer to "Frequency tuning" on page 31.)
3
Press the memory button momentarily.
(The memory indicator will illuminate.)
Note:
If the memory button is pressed continuously, the automatic
memory presetting is activated. To stop the auttxnatic
memory presetting, press the tuning button.
Then l^in again from step 2.
4
Select the desired "channel"
(Refer to "To confirm the stations which are preset to each
channel" on page 31.)
■ FM mode (FM AUTO, MONO) memory
With this unit, it is possible to enter into the memory FM broadcast
stations in the nwnaural mode. This is convenient when entering
into the memory an FM broadcast station that is broadcasting FM
stereo signals in whi^ there is much noise.
(J) Follow above steps 1 thrcHjgh 2.
(D Press the FM owde button to select "MONO". (The "MONO"
FM mode indicator will illuminate.)
@ Follow steps 3 through 5 above.
5
Press the memory button momentarily.
(The memory indicator will go out.)
6 Repeat the above procedures to make mem'
ory presettings.
-
32
-
Advertisement
Table of Contents
