Advertisement
Offset White – inactive
the settings that work best for your project.
S&Q Motion – Slow and quick motion, to be used
when shooting a non-sync speed. Frame rates
are limited by the recording medium (card)
selected and image resolution. For the highest
frame rate, use CF Cards and/or a reduced
resolution (Imager Scan Mode – under the
Project/Rec Format menu) It may be necessary to
record in HD at 23.98 fps in order to achieve the
highest possible frame rate. This would then require one to up-rez the shot in post to fit
the 4K workflow. This must be tested with camera and post in pre-production.
Monitor LUT (Look Up Table)
Category LUT
LUT Select – either s709, 709 (800%) or S-Log3 –
depending on which you prefer to monitor
One can also upload a custom 3D LUT
Monitor LUT Setting
Internal Rec – MLUT Off
Monitor Out – MLUT On
Monitor 3D LUT
Load .cube file from SD Card
Noise Suppression
Setting (Cine EI) Off *(If you
you can add it in color
grading)
Flicker Reduce
Mode Off
SONY FX9 Camera Setup
Focus is only active when using E mount Lenses
with auto focus capabilities or EF mount lenses
with an appropriate adapter to permit the auto
focus
function to
perform.
Be sure to
test to
determine
6
need noise suppression,
Advertisement
