Advertisement
DISASSEMBLY FOR REPAIR
1.
Remove the metallic case and remove 6 screws retaining
the panel assembly (@).
2.
Remove the panel assembly and pull off the BASS, TRE-
BLE, BALANCE, METER RANGE knobs (@, @).
3.
Remove
2 screws at the ends of the sub panel and 4
screws retaining the switches (@, @).
4.
Cut the wire bands bonding the lead wires with a wire
cutter (@). Pull the sub panel frontward and then com-
ponents on pc board can be replaced (@).
5.
For repair of XO7 (B/4) pc board, remove 2 push rivets
Py
and tilt it toward the rear (@, @).
SO
6.
For replacement of power transistors, use a hex-wrench
Se
(W05-0022-00) ( @).
Advertisement
