GE Moffat Series Owner's Manual page 21

Troubleshooting tips ... Before you call for service
Problem
Steam
Sanitized light does not
illuminate at the end of the
cycle
Noise
A white film on glassware,
dishware and the interior
29-6273
Possible Cause
This is normal.
The door was opened and the
cycle was interrupted during
final rinse.
The incoming water
temperature was too low.
Normal operating sounds:
Beeping at the end of the cycle
(on some models).
Detergent cup opening.
Water entering dishwasher.
Motor stops and starts at
various times during cycle.
Spray arms start and stop at
various times.
Drain pump sounds during
pump out.
Drain pump starts and stops
several times during each drain.
Rattling dishes when the spray
arm rotates.
Rattling silverware against door
during wash.
This problem is likely caused
by a low quality phosphate-free
dishwasher detergent.
What To Do
Warm, moist air comes through the vent during drying
and when water is being pumped out. This is necessary
for drying.
wash cycle.
Make sure dishes are properly loaded. See the Loading
section.
Tall utensils may be placed in the upper rack to avoid
bumping against inner door during wash cycle.
To remove the white film, run your dishes through
Dishwasher Cleaner found at your local grocery store.
and other metal items out of the dishwasher. Turn
the dishwasher on and let it run through a complete
cycle without detergent. The glassware, dishware, and
dishwasher should come out film free. Alternatively,
vinegar into dishwasher just after the detergent cup
opens and let the dishwasher complete its cycle. This
may be repeated several times a year as needed. The
use of a rinse agent such as Finish
of a highly rated detergent such as Finish
Automatic Dishwashing Detergent will help prevent
film build-up.
Finish ®
® Jet-Dry ® Rinse Aid
® Quantum ®