DeWalt DWE4235 Original Instructions Manual
Hide thumbs
Also See for DWE4235:
- Original instructions manual (204 pages) ,
- Manual (204 pages) ,
- Original instructions manual (60 pages)
Related Manuals for DeWalt DWE4235
Summary of Contents for DeWalt DWE4235
- Page 1 English (original instructions) DWE4206 DWE4207 DWE4217 DWE4227 DWE4235 DWE4237 DWE4238 DWE4257...
- Page 2 Fig. A Fig. B Fig. C Copyright D WALT...
- Page 3 Fig. D Fig. E XXXX XX XX Fig. F Fig. G...
-
Page 4: Technical Data
English SMALL ANGLE GRINDERS DWE4206, DWE4207, DWE4217, DWE4227, DWE4235, DWE4237, DWE4238, DWE4257 Congratulations! You have chosen a D WALT tool. Years of experience, thorough product development and innovation make D WALT one of the most reliable partners for professional power tool users. - Page 5 An estimation of the level of exposure to vibration should also Small Angle Grinders take into account the times when the tool is switched off or when DWE4206, DWE4207, DWE4217, DWE4227, DWE4235, it is running but not actually doing the job. This may significantly DWE4237, DWE4238, DWE4257 reduce the exposure level over the total working period.
-
Page 6: Electrical Safety
1) Work area safety Small Angle Grinders a ) Keep work area clean and well lit. Cluttered or dark areas DWE4206, DWE4207, DWE4217, DWE4227, DWE4235, invite accidents. DWE4237, DWE4238, DWE4257 b ) Do not operate power tools in explosive atmospheres, WALT declares that these products described under such as in the presence of flammable liquids, gases or dust. - Page 7 English SAFETY INSTRUCTIONS FOR ALL OPERATIONS c ) Prevent unintentional starting. Ensure the switch is in the off position before connecting to power source and/or Safety Warnings Common for Grinding, Sanding, Wire battery pack, picking up or carrying the tool. Carrying power Brushing, or Cutting-Off Operations: tools with your finger on the switch or energising power tools that a ) This power tool is intended to function as a grinder,...
-
Page 8: Kickback And Related Warnings
English Safety Warnings Specific for Grinding and Cutting- contacting a "live" wire may make exposed metal parts of the power tool "live" and could give the operator an electrical shock. Off Operations l ) Position the cord clear of the spinning accessory. If you a ) Use only wheel types that are recommended for your lose control, the cord may be cut or snagged and your hand or power tool and the specific guard designed for the selected... - Page 9 English g ) Do not attempt to do curved cutting. Overstressing the • Connect the brown lead to the live terminal in the plug. wheel increases the loading and susceptibility to twisting or binding • Connect the blue lead to the neutral terminal. of the wheel in the cut and the possibility of kickback or wheel WARNING: No connection is to be made to the breakage, which can lead to serious injury.
-
Page 10: Intended Use
English Attaching Side Handle (Fig. B) Guard release lever Dust ejection system WARNING: Before using the tool, check that the handle is Intended Use tightened securely. Screw the side handle 3 tightly into one of the holes on either Your heavy‑duty small angle grinder has been designed for side of the gear case. - Page 11 English WARNING: Use of a damaged flange or guard or fail ure to use proper flange and guard can re sult in injury due to wheel breakage and wheel contact. See the Accessory and guard Applications Chart for more information. 1.
-
Page 12: Prior To Operation
English CAUTION: To reduce the risk of personal injury, wear • The gear becomes very hot during use. work gloves when handling wire brushes and wheels. They • Apply only a gentle pressure to the tool. Do not exert side can become sharp. pressure on the disc. - Page 13 English Precautions To Take When Working on a Spindle Lock (Fig. B) Painted Workpiece The spindle lock button is provided to prevent the spindle 1 1. Sanding or wire brushing of lead‑based paint is NOT from rotating when installing or removing wheels. Operate the RECOMMENDED due to the difficulty of controlling the spindle lock only when the tool is turned off, unplugged from contaminated dust.
- Page 14 English MAINTENANCE 1. Allow the tool to reach full speed before touching the tool to the work surface. Your D WALT power tool has been designed to operate 2. Apply minimum pressure to the work surface, allowing the over a long period of time with a minimum of maintenance. tool to operate at high speed.
-
Page 15: Protecting The Environment
11500 20.0 125 12 11500 20.0 Additional information for guards and Accessories for DWE4206 , DWE4207, DWE4217, DWE4227, DWE4235, DWE4237, DWE4238, DWE4257 ≤10 mm When using segmented diamond wheels, use only diamond wheels with a peripheral gap not greater than 10 mm and negative rake angle. - Page 16 English Accessory and Guard Applications Chart guard Type Accessory Description how to Fit grinder Depressed centre grinding disc Type B Type B guard Guard Flap wheel Backing flange Wire wheels Type 27 depressed centre wheel Threaded clamp nut Wire wheels with threaded nut Type B guard Wire wheel...
- Page 17 English Accessory and Guard Applications Chart (cont.) guard Type Accessory Description how to Fit grinder Masonry cutting disc, bonded Type A Type A guard Guard Metal cutting disc, bonded Backing flange Diamond cutting wheels Cutting wheel Type A Guard Threaded clamp nut Type B Guard DANGER: Do not use for wood cutting or woodcarving.
- Page 20 Belgique et Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Tel: FR 32 15 47 37 64 support@dewalt.be support@dewalt.be.fr Danmark Tel: 70 20 15 10 www.dewalt.dk support@dewalt.dk Deutschland Tel: 06126‑21‑0 www.dewalt.de support@dewalt.de Ελλάς Τηλ: 00302108981616 www.dewalt.gr support@dewalt.gr España Tel: 934 797 400 www.dewalt.es support@dewalt.es France Tel: 04 72 20 39 20 www.dewalt.fr support@dewalt.fr...