If You Cannot Restore Raw Files; If You Cannot Telnet To The Command Parser Socket - HP 16500H User Manual

If you cannot restore raw files

If the setup.raw and data.raw files seem to be ignored when you copy them to
the HP 16500B system:
Verify the LAN connection between your computer and the HP 16500B.
Refer to "If you cannot connect to the HP 16500B" earlier in this chapter.
Change the file time-out. To change the time-out:
Access the HP 16500B System Configuration menu.
1
Select the Communications field.
2
Select the Ethernet field under Configuration.
3
Select Advanced Configuration in the Ethernet Configuration pop-up
4
menu.
Set the file time out using the File Time-out field in the Advanced
5
Configuration menu.
A value of about 1.5 seconds should be sufficient. Set the time out to
the minimum value that will allow network operations to work
reliably.
If you cannot TELNET to the command parser
SOCKET
If you get a "connection timed out" or "no response from host" message:
Verify the LAN connection between your computer and the HP 16500B.
Refer to "If you cannot connect to the HP 16500B" earlier in this chapter.
If you get a "connection refused" or "no response from host" message:
If You Have a Problem
If you cannot restore raw files
7-5