Yamaha EC-03 2012 Owner's Manual page 46

OPERATION AND IMPORTANT RIDING POINTS
5. Turn the key to "ON".
1
2
3
4
After all displays come on for a few
seconds, the vehicle enters the
5
standby mode.
1
6
7
8
9
1. Security lock indicator "
TIP

When the security lock is locked,
the security
"

If the accelerator grip is turned
while the vehicle is in the standby
mode, the beeper sounds.
6. Cancel the standby mode by
pressing one of the buttons.
1
1. Button 1 "POWER"
2. Button 2 "SET"
3. Button 3 "SELECT"
The vehicle enters the security
lock unlocking mode.
"– – – – –" is displayed.
LOCK"
lock indicator
LOCK" comes on.
2
3
7-2
1
1. Input number indicator "– – – – –"
TIP
If the security lock is not locked, after
canceling the standby mode, the vehi-
cle enters the riding mode. When the
vehicle is in the riding mode, the beeper
sounds. The beeper stops sounding
when either brake lever is squeezed or
the vehicle starts moving. Proceed to
step 8.
7. Enter the security number using
the buttons.
Entering the correct number un-
locks the security lock and the ve-
hicle enters the riding mode.