Table of Contents
Advertisement
INSTALLATION INSTRUCTIONS
Downflow Installation
15. Re-insert the EEV coil and TC1/TC2 sensors in their original positions, as shown below. The ring temperature sensor
should be inserted into the upper hole of the evaporator cover with a wire clamp. The hole in the front of the triangular
plate (where the temperature sensor was originally located) may remain open and unblocked.
16. Manage TC1/TC2, ring temperature sensor, and EEV coil cables using the elastic straps fastened to the unit. Make
sure to keep all cables outside of the drain pan.
31-5000755 Rev. 0
19
Advertisement
Table of Contents
