in Case of Difficulty
lf your unit is not operating properly, check the points listed in the following table.
= Auto reverse inoperative:
e Is the [AUTO REVERSE]
button ON?
= Poor radio sensitivity:
e@ Straighten the headphone cord.
@ Set the [MODE]
selector to MONO, or use the unit near windows.
® Radio inoperative:
@ Clean the contacts on the tuner pack or unit with a cotton swab.
Specifications
— Tape Section —
Track system:
Recommended tape:
Tape speed:
Frequency response:
Output terminals:
Maximum output power:
Power supply:
Dimensions:
Weight:
— Tuner Section —
Receiving frequency:
Stereophonic
Normal
ferric, chrome dioxide, and metal alloy:
C-30 to
C-120
4.8 cm/sec.
Reproduction:
40Hz
to
14kHz
(normal),
40Hz
to
16 kHz (metal)
3.5 mm dia. stereo headphone jack x 2
Integration 40 mW (20 mW + 20 mW) with 32 ohm load
3 V DC (SUM-3 "'AA" x 2)
External power source supplied to the [DC IN 3V]
jack
(3.4 mm dia. center contact negative)
80.5 (W) x 108 (H) x 29.5 (D) mm
290 g (inctuding batteries but not the tuner pack)
FM:
88MHz to 108 MHz
AM:
525 kHz to 1605 kHz
@ This FM/AM
tuner pack (RP-AF2)
is designed exclusively for this unit and KT-VS1,
and is not usable in other types of cassette recorders.
® Specifications are subject to change without notice due to improvement.
19