Remote; Remote Update - Miele PDR 914 Operating And Installation Instructions

Supervisor level

Remote

External program selection is possible via an external terminal (program may only be
started on the machine). However, programs may also be selected and started on the ma-
chine.
Factory default: on

Remote Update

The RemoteUpdate function is used for updating the software in your dryer.
RemoteUpdate is activated by default.
If you do not install a RemoteUpdate, you can continue to use your tumble dryer in the
usual way. However, Miele recommends installing RemoteUpdates.
Miele's RemoteUpdate function can only be used if the dryer is connected to a WiFi/LAN
network and you have an account in the Miele Professional app. The dryer must be regis-
tered in the app.
See the Miele Professional app for terms of use.
If a RemoteUpdate is available for your tumble dryer, it will be displayed automatically when
the supervisor level is open.
You can choose to start the RemoteUpdate immediately or wait until later. If you select
"Start later", the prompt to run the RemoteUpdate will be displayed again the next time you
switch on your tumble dryer.
The RemoteUpdate can take a few minutes.
Please note the following information about the RemoteUpdate function:
- You will only receive a message when a RemoteUpdate is available.
- Once a RemoteUpdate has been installed, it cannot be undone.
- Do not switch off the tumble dryer during a RemoteUpdate. Otherwise, the RemoteUp-
date will be aborted and will not be installed.
42