Philips 4000 Series User Manual page 69

Mode 3: [TCP on, WOL off, auto on/off]
DC off -> Back light off, LED: Red
Power Save -> Back light off, LED: Orange. Can be
woken up.
Mode 4: [TCP on, WOL off, no auto on/off]
DC off -> Back light off, LED: Red
Power Save -> Will not enter power save mode. It
shows "no signal" only.
Mode 3
DC OFF:
Backlight Off only
Power Save:
Backlight Off only
Mode 4
DC OFF:
Backlight Off only
Power Save:
No signal(Backlight On)
DC off/on: Press power button by RC
Scaler FW Update
Update scalar FW by USB.
NOTE: Only USB 2.0 flash disk is supported.
Information OSD
Set the period of time that the information OSD is displayed on
the upper right corner of the screen. The information OSD will
display when the input signal is changed.
The information OSD will remain on the screen with {Off}
selection.
The options are: {Off, 1 ~ 60} seconds.
Advanced option reset
Reset all settings except {Date and Time} in the Advanced
option menu to factory preset values.
1. Press [OK] or [ ] button to enter the submenu.
2. Press [ ] or [ ] button to select {Reset} and press the [OK]
button to restore settings to factory preset values.
3. Press the [ ] button or select {Cancel} and press the [OK]
button to cancel and return to the previous menu.
Mode 1(default)
DC OFF:
Power Off
Power Save:
Power Off
Mode 2
DC OFF:
Power Off
Power Save:
Power Saving
67
65BDL4650D/75BDL4650D/86BDL4650D