Page 3
YAMAHA Electronic Drum Rack System Thank you for purchasing the Yamaha Electronic Drum Rack System RS60A. Before using, thoroughly read this assembly manual, and use this product safely and correctly. I RS60A Rack Stand Parts * Before assembling the rack stand, make sure all of the parts shown below are included.
Page 4
I RS60A Assembly * A screw driver (+ or -) is necessary to complete the assembly. Please make sure that the fixing bolts on each part, such as clamps, pads, etc. are firmly tightened. Bolts that are too tight or too loose may result in damage to the part or the part dropping. Please use caution. Insert the Center Bar into the tube clamps on the Left Side As- sembly...