Table of Contents
Advertisement
Programming the TRICK
Repeater Operation
Timers - the following timers are configured using this screen:
Repeater hang timer (s)
Repeater block timer (s)
Repeater time out timer (s)
Repeater Knock-Down timer (min)
Repeater type
Type 1
Type 2
Unconditional
Confidence beeps in hang time
Enabled or disabled
Line Interface
Line connection
Two wire
Four wire
Nominal level
Adjust nominal level to line: range 0 to -13 dBm
Adjust nominal level from line: range 0 to -13 dBm
PL tone detect action
Off - normal operation
RX audio inhibit - RX audio inhibit on PL detect
Send guard tone - Console TX inhibit on Busy Channel
Compensation - wireline compensation methods
Centro Plus
Gain (dB)
Equaliser (dB)
TRC to line - enable/disable TRC commands sent from TRICK to the wireline Line Operation
TRC acknowledge
TRC tone
TRC ack delay time (ms)
1-12
Installation and Programming Guide
Advertisement
Table of Contents
