OTHER
EQUIPMENT: CONNECTION
AND
OPERATION
SIGNAL METER
AM
ANTENNA
À
eS,
—
A first-quality AM ferrite bar antenna is built into the
rear panel. Beginning AM
reception should be done
using this antenna only; tune in a strong station and
then swing out the bar while watching the signal meter
to find the best angle (see Fig. 1).
Inside a ferroconcrete building or in a weak signal area
where this antenna alone does not provide sufficient
signal strength, an outdoor AM antenna must be in-
stalled. Connect it to the AM antenna terminal and set
it up as shown in Fig. 2. Be sure to ground the set
with the ground terminal next to the AM terminal
at this time.
Set the Function selector to AM and tune across the
|
|
|
|