Yamaha CBX-D5 Owner's Manual page 4

Figure 1. System connections
50-WAY to 25-PIN
SCSI CABLE
HARD
DISK SCSI
50-WAY SCSI
CABLE
SCSI
POWER
CABLE
POWER
CABLE
Switching on the power
Switch on the SCSI devices: CBX-D5, hard disk, SCSI adaptor.
1)
2) Switch on the Atari computer and load Cubase Audio.
What to do next
• The SCSI hard disk must be formatted before it can be used (refer to the hard disk's
Operating Manual). See also "Working with Hard Disks" on page 18 of the CBX-D5
Operating Manual.
• For recording and playback you should refer to the Cubase Audio Operating
Manuals. See also "Recording" on page 20 and "Playback" on page 23 of the
CBX-D5 Operating Manual.
Notes:
• Other MIDI devices can be connected in this system as shown in "MIDI" on page 30
of the CBX-D5 Operating Manual.
• For audio device connection, see "Inputs & Outputs Explained" on page 26 of the
CBX-D5 Operating Manual.
• For more details about SCSI hard disks and connecting extra disks, see "Connecting
Hard Disk Drives" on page 13 of the CBX-D5 Operating Manual.
• In this system, only one external hard disk is used. It is, however, highly
recommended, for the sake of data integrity, that you use at least two hard disks: one
disk for your computer software and data such as Cubase Audio, MIDI song files,
etc., and the other disk purely for recording CBX-D5 sound files.
POWER
SUPPLY
DMA to SCSI
SCSI
Converter @
SCSI
TERMINATOR
CBX-D5
MIDI OUT
MIDI CABLES
MIDI IN
Switching on the power Switching on the power Switching on the power
19-PIN to 19-PIN
D-SUB CABLE
DMA IN
ATARI
ST/STE
HARD DISK
MIDI OUT
MIDI IN
3 3 3
POWER
CABLE