Table of Contents
Advertisement
10 Display
To inform you of the functioning of the unit.
11 Source selection buttons
To select the sound source and switch the unit
on:
— CD: CD player;
— TUNER: radio reception;
— TAPE: cassette playback;
— AUX/TV: TV or other external sound source.
12 DYNAMIC BASS BOOST
To set extra bass.
13 CD controls
— «: to open and close the CD tray;
— Mi: to stop playback/erasure of a program;
— PAI: to start and interrupt playback;
— PREVIOUS: to return to the start of a track, se-
lect a previous track and search for a passage
during playback;
— NEXT: to select a next track and search for a
passage during playback;
- ee
to connect
recordings
from
different
Ds.
14 VOLUME
To adjust the volume.
15 BALANCE
To set the stereo balance.
16 Controls DECK 2 (recording and playback)
~ REC/PAUSE: to start and interrupt recording;
— <4 : to start a track again and go to another
during playback and fast winding;
— ¢: to start playback in the reverse direction;
— MM: to stop recording, playback and fast winding;
— >: to start playback in the normal direction;
— PP : to start a track again and go to another
during playback and fast winding.
17 Cassette compartment DECK 2
18 Cassette deck buttons for special functions
- CD > DECK 2: to start a synchronous CD re-
cording;
~ NORMAL SPEED: to dub a cassette at normal
speed;
— HIGH SPEED: to dub a cassette at high speed.
19 Tape cycle switch
— = : to record or playback side A or B;
— C_: to record or playback both sides;
—C.) : continuous playback from one or two cas-
settes.
20 DOLBY NR
be switch the noise reduction system on and
off.
21 Cassette compartment DECK 1
22 Controls DECK 1 (playback only)
The same functions as the corresponding but-
tons on DECK 2.
ON THE REMOTE CONTROL (fig. 2)
1 RECORD
The same function as REC/PAUSE on the unit.
2 Controls DECK 2
The same function as on the unit.
3 Controls DECK 1
The same function as on the unit.
4INTRO
To playback the start of each track on a CD.
5 SPACE
To dub a CD and lengthen the pauses between
the tracks.
6 CHAIN
To dub a CD and shorten the pauses between
the tracks.
7 TIME
To change the playing time information when
playing a CD.
8 WARP
To store the playing time of the cassette when
dubbing a CD.
9 EDIT
To store the playing time of the cassette when
dubbing a CD.
10 CANCEL
- To correct mistakes when storing preset sta-
tions and programming a CD.
— To erase preset stations and tracks from a pro-
gram.
11 Digit buttons 1-0
The same function as on the unit.
12 TIMER
To switch the timer on and off.
13 POWER
The same function as on the unit.
14 SLEEP
To switch the slumber switch on and off.
15 AUX
The same function as on the unit.
16 SNOOZE
To repeat the alarm signal.
17 TAPE
The same function as on the unit.
18 VTUNING A
The same function as on the unit.
19 TUNER
The same function as on the unit.
20 CD
The same function as on the unit.
214
The same function as on the unit.
22 P/Il
The same function as on the unit.
23 ml
The same function as STOP/CLEAR on the unit.
24 MEMORY
To store preset stations and program a CD.
25 PP.
The same function as NEXT on the unit.
26 ed /~<t<
The same function as PREVIOUS on the unit.
27 AB
To repeat a passage of a CD.
28 ALL/PRG
To repeat the whole CD.
29 V VOLUME A
The same function as the VOLUME contro! on
the unit.
30 MUTE
To switch the sound off.
Advertisement
Table of Contents
