Kenwood 1050CD Instruction Manual page 18

Editing (EDIT)
ee
Normal EDIT: Edit from one disc.
on each side of the tape is fully recorded and that the pos-
sible recording time on the tape will be fully used.
fe}
mode.
Make sure the PGM indicator is extinguished.
~
f
.
1 Press the EDIT mode key.
The CD contents are edited as follows.
eor Lights up.
(1) The input tape recording tme is divided by two, and tracks that can
be accommodated in file A (which refers to tracks on tape side A) are
Press once
(ORCROROMO)
selected in order of their track Nos
Blinks.
2 Select the disc to be edited {one disc only).
sca mec
©
@ The edit function cannot be used for two or more discs.
Dect oece
(2) In a few seconds, the time left on tape side A is displayed, then file B
(tracks on tape side B) 1s edited in the same manner.
3 Input the recording time of the tape.
aye tne
pu Be
[>>] : increase by one minute.
The order of CD tracks are changed automatically so that
no tunes is interrupted at the end of tape sides A and B.
30-minute tape: ey] 7 2 3 3
46-minute tape:
(5)
It =
I )
7 6 4
@ When the interval length has been set using the numeric keys, the
8 |
| J
[EDIT]key does not have to be pressed after the interval has been
set. Side B
.
y,
18 s0s0cono4co/03cD (En)