Installation - Zanussi ZF 67/44 Instructions For Use And Care Manual

Installation
Door frames (only for models provided
with such frames)
Remove the adhesive tape protecting the
frames of the doors.
To this purpose it will also be necessary
to remove the handles, screwing them on
again in the same position, or, on the
opposite side, if the door is to be opened
on the opposite sense.
Rear spacers
The plastic bag containing all relevant
documentation also contains two rear
wall spacers to be fitted into special
slots on the back of the appliance. Fit
the spacers into the slots, taking care to
ensure that the arrow «A» is positioned
as shown in Figure 1. Next, turn them
through 45° (arrow in vertical position)
until they lock into place.
Fig. 1