Updating the Firmware
When you select the Firmware Update option in the base unit's Initial/All
Settings menu, the base unit enters firmware update mode and is ready to
perform a firmware update using the USB-A or Service port.
Related Links
g
• "Updating Firmware Using a USB Storage Device"
• "Updating Firmware Using a Computer and USB Cable"
Updating Firmware Using a USB Storage Device
You can update the base unit's firmware using a USB storage device.
Responsibility for updating the firmware lies with the customer. If a
firmware update fails due to problems such as a power failure or
communication problems, a fee will be charged for any necessary repairs.
a
Download the base unit firmware file from the Epson Web site.
b
Copy the downloaded firmware file to the root folder (highest folder in the
hierarchy) of the USB storage device.
• The USB storage device must be formatted in FAT format.
• Do not copy any other files to the USB storage device.
• Do not change the firmware's file name. If the file name is
changed, the firmware update will not start.
• Check that the firmware file you copied is the correct file for your
model. If the firmware file is not correct, the firmware update
will not start.
p.100
p.101
c
Connect the USB storage device to the base unit's USB-A port.
Connect the USB storage device directly to the base unit. If the USB
storage device is connected using a USB hub, the firmware update
may not be applied correctly.
d
Press the [Menu] button, select the Initial/All Settings menu, and press
the Enter button.
e
Select Firmware Update and press the Enter button.
100