Husqvarna BGS 250 Operator's Manual page 14

To start the product
1. Push down the handle lightly to lift the grinding
head from the surface, approximately 1 mm. This
decreases the pressure against the surface. Do not
lift the grinding head fully from the surface.
2. Push the ON button to start the product. In less than
5 seconds the product operates at the idle speed.
14
To start the product
1. Push down the handle lightly to lift the grinding
head from the surface, approximately 1 mm. This
decreases the pressure against the surface. Do not
lift the grinding head fully from the surface.
2. Push the ON button to start the product. In less than
5 seconds the product operates at the idle speed.
To stop the product
CAUTION:
the surface when you stop the motor. The
tool plate rotates for a while after the motor
stops. Much of the dust can blow off into the
air and the surface can become damaged.
Do not lift the tool plate from
2363 - 002 - 12.03.2024