Table of Contents
Advertisement
FE Lock
Compose the picture.
Check that-** is displayed
in the viewfinder. Then,
press the shutter button
completely to take the pic¬
ture.
• Each time the FE lock button is
pressed, a preflash is fired to
obtain the correct flash exposure
reading which is then locked for
16 sec
• FE lock is canceled 16 sec after
the FE lock symbol (FEL) is dis¬
played, or when the Command
Dial is turned.
The flash exposure reading for
the subject's face was locked
and the picture was composed
as shown above. Optimum flash
exposure of the subject is
obtained without the unneces¬
sary reflection from the back¬
ground.
24
If the subject is too far away for FE lock to be set successfully, V blinks
Move closer to the subject and repeat steps 3 and 4.
Advertisement
Table of Contents
