XM Satellite Radio tuning
Setting XM Satellite Radio preset
channels
You can use this feature to store up to 40 XM Satellite
Radio channels (A1 to E8: 8 preset channel numbers in
each of the 5 preset channel groups). You can then recall
any preset channel easily by selecting the preset channel
group and number as described in "Preset Search mode"
on page 43.
1
Search for a channel you want to set as a
preset channel by using one of the XM
Satellite Radio search modes.
See "Basic XM Satellite Radio operations" on
page 42 for details.
Press 6 MEMORY (or E XM MEMORY).
2
The MEMORY indicator flashes in the front panel
display for approximately 10 seconds.
Note
You must proceed to and carry out steps 3 through 5 while
the MEMORY indicator is flashing in the front panel
display.
Press 4 CATEGORY (or D A-E/CAT. l / h)
3
repeatedly to select a preset channel group
(A to E) while the MEMORY indicator is
flashing.
The preset channel group letter appears in the front
panel display.
C
[043] XMU
Currently selected preset channel group
44
En
Press 5 PRESET/TUNING/CH l / h (or
4
D PRESET/CH k / n) repeatedly to select a
preset channel number (1 to 8) while the
MEMORY indicator is flashing.
The preset channel number appears in the front panel
display.
Currently selected preset channel number
Press 6 MEMORY (or E XM MEMORY) to
5
set the selected XM Satellite Radio channel
as a preset channel while the MEMORY
indicator is flashing.
A colon (:) appears next to the preset channel number
for confirmation, and the MEMORY indicator turns
off in the front panel display.
Note
Once you set a new preset channel, the one previously stored in
the same preset channel group and number is cleared.
Flashes
MEMORY
C5 [043] XMU
C5:[043] XMU
Colon (:)
Flashes
MEMORY