Panasonic TU-PTA500U Operating Instructions Manual page 31

Adjusting PICTURE POS./SIZE (PC input mode)
H-POS
H-SIZE
V-POS
V-SIZE
When the Position Left "," button is pressed
F \
'/
When the Position Left "'.I" button is pressed
/ I
i
When the Position Right "'P." button is pressed
\ / / \,,
\
_-_ j
When the Position Right "_" button ts pressed
!©
L
/ f ...... \
i I
L
When the Position Left "_1" button *s pressed
'
When the Position Right "_" button is pressed
When the Position Left "_" button is pressed
I 1
I
©
When the Position Right _,-"bu ton is pressed
l
1
I© _ ©
o o
f
_'/ \U
1
Flickering and distortion can be eliminated by using the Position Left "_" or Right "P,-"button to
CLOCK PHASE
carry out adjustment.
Note:
Adjustment details of each input signal (frequency) for PC input signal modes are memorized separately.
_ Helpful Hint ( ...... I NORMAL,ZE Normalization)
While the PICTURE POS./SIZE display is active, if either the NORMAL button on the remote control is pressed at any
time or ACTION button is pressed during "NORMALIZE". then all adjustment values are returned to the factory settings
31