Selecting The Harmony/Echo Type - Yamaha PSR-S710 Reference Manual

Selecting the Harmony/Echo type

You can select the desired Harmony/Echo effect from a variety of types.
When the [MONO] button is turned to on or you use the Super Articulation Voices, the Harmony/Echo effect may not work properly.
NOTE
1
Turn the [HARMONY/ECHO] button on.
2
Call up the operation display.
[FUNCTION] → [H] HARMONY/ECHO
3
Use the [1 ▲▼]–[3 ▲▼] buttons to select the Harmony/Echo type.
The Harmony/Echo types are divided into the following groups, depending on the particular effect
1
applied.
■ Harmony Types
When one of the Harmony Types is selected, the Harmony effect is applied to the note played in the right-
hand section of the keyboard according to the type selected above and the chord specified in the chord
section of the keyboard shown below.
■ Multi Assign Type
The Multi Assign effect automatically assigns notes played simultaneously on the right-hand section of the
keyboard to separate parts (Voices). Both of the keyboard part [RIGHT 1] and [RIGHT 2] should be turn
on when using the Multi Assign effect. The Right 1 and Right 2 Voices are alternately assigned to the notes
in the order you play.
6
PSR-S910/S710 Reference Manual
Harmony Types
These types apply the harmony effect to notes played in the right-hand sec-
tion of the keyboard according to the chord specified in the left-hand section
of the keyboard. (Note that the "1+5" and "Octave" settings are not affected
by the chord.)
Multi Assign Type
This type applies a special effect to chords played in the right-hand section
of the keyboard.
Echo Types
These types apply echo effects to notes played in the right-hand section of
the keyboard in time with the currently set tempo.
Split Point
Chord section for Style playback
and Harmony effect
Split Point
Split Point
(for the Voice)
(for Style playback)
LEFT Voice
Chord section for
Style playback and
Harmony effect
LEFT Voice and chord section
for Harmony effect
RIGHT 1 and 2
Voices
Split Point
RIGHT 1 and 2 Voices