NEC UNIVERGE SV9100 Manual page 228

228
Multiple Call Forwarding – All Calls – K-CCIS
Feature Description
This feature allows a Multiple Call Forwarding – All Calls sequence to be forwarded over a K-CCIS network
to a station in another office. For more details, refer to the UNIVERGE SV9100 Features and Specifications
Manual.
System Availability
Terminal Type:
All multiline terminals
Required Components:
GPZ-IPLE
Operating Procedures
To set Call Forward – All Calls – K-CCIS from a Multiline Telephone (Closed Numbering Plan):
1. Press the Call Forward – All ON/OFF key.
2. Dial 1 to set. Then enter the K-CCIS station number.
3. Press Speaker.
- OR -
1. Lift the handset or press Speaker.
2. Dial Access Code 741 (set as default). Then Dial 1 to set.
3. Dial the remote K-CCIS station number.
4. Restore handset or press Speaker.
To set Call Forward – All Calls – K-CCIS from a Multiline Telephone (Open Numbering Plan):
1. Press the Call Forward – All Call ON/OFF key, and Dial 1 to set.
2. Dial the trunk Access Code (normally 8).
3. Dial the Office Code number.
4. Dial the distant K-CCIS station number.
5. Press Speaker.
- OR -
1. Lift the handset or press Speaker.
2. Dial Access Code 741 (set as default), and Dial 1 to set.
3. Dial the trunk Access Code (normally 8).
4. Dial the Office Code number.
5. Dial the distant K-CCIS station number.
6. Restore handset or press Speaker.
To cancel Call Forward – All Calls – K-CCIS from a Multiline Telephone:
1. Press Call Forward – All Call On/Off key.