Dsp (Psr-640) - Yamaha Portatone PSR-640 Owner's Manual

DSP
(PSR-640)
Applying the DSP effect
Press the [DSP] button.
The effect will be applied when you play the R1, R2 and L
voices from the keyboard.
In addition, when the [FAST/SLOW] button is pressed,
the indicator lights up indicating that the variation of the
DSP effect is selected. When the DSP effect type is Rotary Speaker or
Tremolo, the speed of the modulation becomes fast.
Selecting a DSP Type
1 3
-
Use the same operation as in "Reverb" (page 50).
4
Select "DSP."
Use the data dial, the [+/YES] button or the [-/NO] button.
5
Press the [NEXT] button.
BACK NEXT
6
Select a DSP type.
Use the data dial, the [+/YES] button or the [-/NO] button.
Refer to the DSP Type List (page 154).
7
Play the keyboard.
Try out some of the other DSP types as well.
Adjust the depth of the DSP.
The two parameters below affect the depth of the DSP effect.
DSP Depth (Send level) ......................................................................................... page 91
Sets the DSP depth for the specified voice or track, and thus the amount of DSP effect
applied to that voice or track.
DSP Return Level ............................................................................................... See below
Sets the amount of DSP effect returned from the DSP effect stage, thus making it
possible to adjust the degree of DSP effect applied to the overall sound.
8
Press the [NEXT] button.
BACK NEXT
9
Adjust the DSP return level.
Use the data dial, the [+/YES] button, the [-/NO] button or the number buttons
[1]-[0].
Digital Effects
• When the Voice Set function
is ON (page 136), the DSP
effect and FAST/SLOW
settings may change
according to the selected R1
panel voice.
• When the selected DSP type
is an Insertion Effect (pages
54, 152), the DSP effect
applies only to the Voice R1.
• If DSP Insertion Effect is
selected (page 54), you
won't be able to set the DSP
Return Level.
53