Kenwood 1050MD Instruction Manual page 25

Recording-reiated keys
When 'AUTO TIME?" is displayed
(Valid during analog recording)
Pressing the SET key while "AUTO TIME?" is displayed initiates
the initial display for the no-sound blank detection time adjust¬
ment for automatic track number marking.
The time after which a no-sound blank is detected can be varied by
operating the skip up/down keys.
The initial setting is "TIME ♦ 2.0 SEC", which can beset in the time
range between 0.5 and 4.0 seconds set in 0.5-second steps.
-!C;53N'C It-
When "AUTO LEVEL?" is displayed
(Valid during analog recording)
Pressing the SET key while "AUTO LEVEL?" is displayed initiates
the initial display for the no-sound blank detection level adjust¬
ment for automatic track number marking.
The level at which no sound blank is detected can be varied by
operating the skip up/down keys.
The initial setting is "LEVEL ♦ 0", which can be set in the level
range between +2 and -2.
I":: ft OiSD av
I i I ir I
As ^sie:] vr '..e OisD'av
■■■■ '
j
When "REC WRITING?" is displayed
"WRITING" refers to the writing of recording-related data in the
Mini Disc.
Pressing the SET key while "REC -*• WRITING?" Is displayed
initiates the initial display for the writing mode setting.
The UTOC writing after recording can be switched on/off by
operating the skip up/down keys.
The initial setting is "WRITING ★ ON".
Setting examples
WRITING ON : Use this setting in normal recording (from a CD,
etc.).
WRITING OFF : At this setting, recording can be started immedi¬
ately as the WRITING mode will not be entered.
Use when recording a short track or a broadcast
from the tuner.
aiscav
i.i 'O
T T ■
2
V ■ •
'-SIC OvE«.
\\ i
/ V
/
/-|-\
^
Aa;.is:sa va je c soi
6
\