Table of Contents
Advertisement
Connecting a TV
FM
ANT
GND
AM
ANT
75Ω UNBAL
IMPORTANT!
– You only need to make one video
connection from the following options,
depending on the capabilities of your TV.
– Connect the DVD receiver directly to the
TV.
Note:
– To hear the TV channels through this DVD receiver,
use the audio cables (white/red - not supplied) to
connect TV IN jacks to the corresponding AUDIO
OUT jacks on the TV.
DVD Receiver
VIDEO OUT (DVD ONLY)
DIGITAL IN
S VIDEO
COAXIAL
COMPONENT
PCM/DTS
VIDEO
q DIGITAL
SYSTEM
CONNECTOR
TO NX-SW300
TV IN
AUX IN
LINE OUT
TV
Using S-video output
S-(separate)video connections achieve a clearer
picture than composite video connections. Use an
S-video cable (not supplied) to connect the DVD
receiver's S VIDEO output to athe S-video input
jack (or Y/C or S-VHS jack) on the TV.
Using the composite video output
Use a composite video cable (yellow -supplied) to
connect the DVD receiver's VIDEO output to the
video input jack (or A/V In/Video In/Composite/
Baseband jack) on the TV.
Connections
13
Advertisement
Table of Contents
