Kenwood DNX7120 Instruction Manual page 88

Audio Control
You can set a Tone curve.
Display the Tone screen
See<Equalizer Control> (page 87).
il Tone curve becomes flat.
IF Bass adjustment items are displayed.
i3] Middle adjustment items are displayed.
i4 Treble adjustment items are displayed.
i5 Sets the Center frequency.
16 Sets the level.
J7 Sets the Q factor. (Only Bass and Middle can
be set)
i8 Bass DC Extend settings. (Only when Bass is
selected)
If turned "On", it extends the bass
center frequency to the low register by
approximately 20%.
i9 Returns to the "Equalizer" screen.
You can set the front and rear audio source.
Display Zone Control
Touch in the "Audio
Control Menu" screen (page 86).
Jl Displays the current source.
J2 Returns to the "Audio Control Menu" screen.
Set the Zone Control
j3] Turns the Zone Function (that sets different
source sounds for front and rear speakers)
On or Off.
j4 Switches the front and rear audio sources.
(This button appears when the Zone
function is On.)
Use "Reverse" to change over the front and
rear audio sources.
js] Sets the front and rear audio source
separately.
(This button appears when the Zone
function is On.)
Q
• When the rear speaker sound is switched, the audio
source that is output at the AV OUTPUTterminal is also
switched to the same source.
j6] Adjusts the volume of the rear channel.
(This button appears when the Zone
function is On.)
iT] Returns to the "Audio Control Menu" screen.
88 @ DNX7120/DDX712/DDX7032