Table of Contents
Advertisement
Cleave Menu
Creating or Erasing a Cleave Mode
How to create a cleave mode
Standard cleave modes are available when the cleaver is delivered, and all other modes
are displayed as [BLANK]. Follow the procedures below to add a new mode.
1. Select a "BLANK" mode, then press and hold the SET key.
Typical cleave modes stored in the cleaver will be displayed.
Select a cleave mode to be copied for reference, then select the new mode from
the [Select Cleave Mode] menu.
Select a "BLANK" mode in
[Select Cleave Mode]
How to delete a cleave mode
Cleave modes can be deleted. Follow the steps below to delete a cleave mode.
Select the cleave mode and press and hold the SET key.
1.
Select [Fiber Type] in [Fundamental Settings] and select "BLANK." Press the SET
2.
key to save the changes.
A confirmation message will appear – press the SET key to proceed past the
3.
message.
Mode No.1 cannot be deleted.
Mode No.1 is automatically selected after deleting a cleave mode.
Select [Fiber Type] in
[Fundamental Settings]
Select "BLANK" using the
UP/DOWN key, then
press the SET key
Deleting a Cleave mode
SET
key
Touch or use the UP/DOWN
press and hold the
SET
key
CT114_Rev
2
keys, then
SET
key
[Fiber Type] screen
46
Advertisement
Table of Contents
