Toro Greensmaster eFlex 1021 Operator's Manual page 37

Using the Lithium-Ion Battery Charger (continued)
Check the power supply cord periodically for holes or cracks in the insulation. Do not
use a damaged cord. Do not run the cord through standing water or wet grass.
1. Insert the charger plug on the power supply cord into the matching input power socket
on the charger.
A damaged charger cord can cause an electrical shock or a fire.
Thoroughly inspect the power supply cord before using the charger. If the cord is
damaged, do not operate the charger until you obtain a replacement.
2. Insert the wall plug end of the power supply cord into a grounded electrical outlet.
Charging the Lithium-Ion Battery
Attempting to charge the batteries with a charger not provided by Toro can result in
excessive heat and other related product malfunctions, which can lead to property
damage and/or injury.
Use the Toro-provided charger to charge the battery.
Recommended Temperature Range for Charging
Recommended charging range
Low-temperature charging range (Reduced
current)
High-temperature charging range (Reduced
current)
Charge the batteries only in temperatures that are within the recommended range.
Note:
The charger will not function in temperatures exceeding the minimum or maximum
temperatures.
1. Park the machine in the location designated for overnight charging.
3460-892A
IMPORTANT
WARNING
CAUTION
0° to 45°C (32° to 113°F)
-10° to 0°C (14° to 32°F)
45° to 60°C (113° to 140°F)
IMPORTANT
Page 5–13 Operation: Battery Operation