Wifi Mac Filter; Wps - Acer Connect Vero W6m User Manual

In 6GHz band, you can view the
number of available channels by
clicking on the drop down. It is set
to "Auto" by default. Available
bandwidth options in 6GHz are
20/40/80/160MHz. It is set to 160MHz
by default.
Note: Since some WiFi 6E clients may
not find the router when the router is
in a non-PSC channel, it is
recommended to enable PSC.

8.5 WiFi MAC filter

Devices that are added to the WiFi
MAC filter will be blocked from
accessing the Internet.
Click on the (+) icon to add the
device in the filter table by entering
its name & MAC address. Up to 32
devices can be added to the MAC
filter.

8.6 WPS

WPS (WiFi Protected Setup)
provides an easy way to connect
your device to the network by
pushing the WPS button (next to
the USB port) or entering a PIN
code.
On this page, you can configure
the WPS settings of 2.4GHz, 5GHz
& 6GHzbands. There are two
methods to configure WPS i.e.
using a PIN (client's PIN or
Router's PIN) or you can choose
a second method, in which you
need to click on "Start WPS",
then enable WPS on your wireless
device within two minutes. WPS
will be disabled, if the WiFi is set to
WPA3, WPA or TKIP mode, or
if the SSID broadcast is turned off.
23 23