Samsung HW-S80 D Series Simple User Manual

Simple User Guide
HW-S80*D / HW-S70*D
You can access the User guide on Samsung's on-line customer support center by scanning the QR code on
the left. To see the manual on your PC or mobile device, download the manual in document format from
Samsung's website. (http://www.samsung.com/support)
QUESTIONS OR COMMENTS?
Samsung Service Center 
1-800-SAMSUNG (726-7864) www.samsung.com/us/support
© 2024 Samsung Electronics Co., Ltd. All rights reserved.
SAFETY INFORMATION
• The following also applies to the Wireless Subwoofer
(PS-WS800D / PS-WS801D / PS-WS705D / PS-WS706D).
SAFETY WARNINGS
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE THE COVER (OR BACK).
NO USER-SERVICEABLE PARTS ARE INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
Refer to the table below for an explanation of symbols
which may be on your Samsung product.
CAUTION
RISK OF ELECTRIC SHOCK. DO NOT
OPEN.
This symbol indicates that high voltage is
present inside. It is dangerous to make any
kind of contact with any internal part of this
product.
This symbol indicates that this product has
included important literature concerning
operation and maintenance.
Class II product : This symbol indicates that a
safety connection to electrical earth (ground)
is not required.
If this symbol is not present on a product
with a power cord, the product MUST have
a reliable connection to protective earth
(ground).
Class B FCC Statement
This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which
can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by
one of the following measures:
• Reorienting or relocating the receiving antenna.
• Increasing the separation between the equipment and
receiver.
• Connecting the equipment to an outlet that is on a
different circuit than the radio or TV.
• Consulting the dealer or an experienced radio/TV
technician for help.
FCC Radiation Exposure Statement :
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment. This
equipment should be installed and operated so there is
at least 8 inches (20 cm) between the radiator and your
body. This device and its antenna(s) must not be co-located
or operated in conjunction with any other antenna or
transmitter.
CALIFORNIA USA ONLY (Applicable for networking models
only.)
This Perchlorate warning applies only to primary
CR(Manganese Dioxide) Lithium coin cells in the product
sold or distributed ONLY in California USA "Perchlorate
Material - special handling may apply, See www.dtsc.
ca.gov/hazardouswaste/perchlorate."
WARNING: Cancer and Reproductive Harm
- www.P65Warnings.ca.gov.
Samsung products and recycling
• Dispose unwanted electronics through an approved
recycler. To find the nearest recycling location, go to our
website:www.samsung.com/recycling Or call, 1‐800‐
SAMSUNG
• WARNING! Never dispose of batteries in a fire because
they may explode. Do not dissemble, crush, puncture,
heat, burn or reuse batteries. For more information,
visit call2recycle.org or call 1-800-822-8837.
Alternatively, visit: www.samsung.com/ recycling or call
1-800-SAMSUNG.
AH81-17428A-01
NSPBI01572A-01
Web Site Address
Samsung Electronics America, Inc.
85 Challenger Road Ridgefield Park,
NJ 07660
AC voltage : Rated voltage marked with this
symbol is AC voltage.
DC voltage : Rated voltage marked with this
symbol is DC voltage.
Caution. Consult Instructions for use : This
symbol instructs the user to consult the user
manual for further safety related information.
WARNING
• To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture.
• To prevent injury, this apparatus must be securely
attached to the floor/wall in accordance with the
installation instructions.
• This product contains chemicals known to the State of
California to cause cancer and birth defects or other
reproductive harm.
CAUTION
• Do not expose this apparatus to dripping or splashing.
Do not put objects filled with liquids, such as vases, on
the apparatus.
• To turn this apparatus off completely, you must pull the
power plug out of the wall socket. Consequently, the
power plug must be easily and readily accessible at all
times.
01 CHECKING THE
COMPONENTS
• Soundbar Main Unit • HDMI to Micro HDMI
• Soundbar Remote Cable
Control • Wall Mount Guide
• Subwoofer • Holder-Screw X 2
• Power Cord X 2 • Screw (M5 X L55) X 4
(Subwoofer, Soundbar) • Screw Anchor X 4
• AC/DC Adapter • Bracket-Wall Mount X 2
NOTE
• For more information about the power supply and
power consumption, refer to the label attached to the
product. (Label: Bottom of the Soundbar Main Unit)
• To purchase additional components or optional
cables, contact a Samsung Service Center or Samsung
Customer Care.
02 PRODUCT OVERVIEW
Top Panel of the Soundbar
HW-S80*D
HW-S70*D
Volume
1
(Multi Function) Button
In standby mode, press the (Multi Function)
button to turn on the Soundbar.
Press the (Multi Function) button to change the
mode.
(Mic On/Off) Button
Press the button to turn the microphone on or off.
When the microphone is off, the LED indicator will
light red.
1 LED indicator
The LED Indicator flashes, glows, or changes color
depending on the Soundbar's current mode or
status.
(Power) Button
Turns the power on and off.
(Source) Button
Press the (Source) button to change the
input source.
• To switch to Bluetooth Pairing state in "Bluetooth"
mode, press and hold the (Mic On/Off) or
(Source) button on the top of the Soundbar for more
than 5 seconds.
Important Safety Instructions
Read these operating instructions carefully before using
the unit. Follow all the safety instructions listed below.
Keep these operating instructions handy for future
reference.
1. Read these instructions.
2. Keep these Instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufacturer's
instructions.
8. Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug.
A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third
grounding prong. The wide blade or the third prong are
provided for your safety. If the provided plug does not fit
into your outlet, consult an electrician for replacement
of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or when
unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally,
or has been dropped.
PRECAUTIONS
1. Ensure that the AC power supply in your house complies
with the power requirements listed on the identification
sticker located on the bottom of your product. Install
your product horizontally, on a suitable base (furniture),
with enough space around it for ventilation (3~4
inches). Make sure the ventilation slots are not covered.
Do not place the unit on amplifiers or other equipment
which may become hot. This unit is designed for
continuous use.
To fully turn off the unit, disconnect the AC plug from
the wall outlet. Unplug the unit if you intend to leave it
unused for a long period of time.
SERVICE
SERVICE
HDMI (eARC) DC 19V
(eARC) HDMI DC 19V
Rear Panel of the Soundbar
1
SERVICE
SERVICE
3
DC 19V
HDMI 2 DC 19V
HDMI
(eARC)
(eARC)
SERVICE
HDMI (eARC) DC 19V
SERVICE
1
Connect a USB storage device to upgrade the
product's software.
HDMI (eARC)
2 SERVICE
Connect to the HDMI jack on a TV.
DC 19V
HDMI
(eARC)
DC 19V
3
Connect the AC/DC power adapter.
(Power Supply In)
03 CONNECTING THE
SOUNDBAR
Connecting the power and units
Rear of Subwoofer
HW-S70*D
HW-S80*D
POWER
POWER
Blue Blinks
DC 19V
DC 19V
Rear of the Soundbar
Main Unit
• The LINK LED indicator stops blinking and glows a solid
blue when a connection is established between the
Soundbar and the Wireless Subwoofer.
2. During thunderstorms, disconnect the AC plug from
the wall outlet. Voltage peaks due to lightning could
damage the unit.
3. Do not expose the unit to direct sunlight or other heat
sources. This could lead to overheating and cause the
unit to malfunction.
4. Protect the product from moisture (i.e. vases), and
excess heat (e.g. a fireplace) or equipment creating
strong magnetic or electric fields. Unplug the power
cable from the AC wall socket if the unit malfunctions.
Your product is not intended for industrial use. It
is for personal use only. Condensation may occur if
your product has been stored in cold temperatures.
If transporting the unit during the winter, wait
approximately 2 hours until the unit has reached room
temperature before using.
5. Fire or explosion may occur, resulting in damage to the
remote control or personal injury.
• Do not apply shock to the remote control.
• Be careful not to let foreign substances such as
metal, liquid, or dust come in contact with the
charging terminal of the remote control.
• When the remote control is damaged or you smell
smoke or burning fumes, immediately stop operation
and then repair it at the Samsung service center.
• Do not arbitrarily disassemble the remote control.
• Be careful not to let infants or pets suck or bite
the remote control. Fire or explosion may occur,
resulting in damage to the remote control or
personal injury.
FCC NOTE (for U.S.A):
FCC Supplier's Declaration of Conformity
Responsible Party - U.S. Contact Information:
Samsung Electronics America, Inc.
85 Challenger Road.
Ridgefield Park, NJ 07660
Phone: 1-800-SAMSUNG (726-7864)
FCC Compliance Statement :
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received,
including interference that may cause undesired operation.
FCC Caution :
• Any changes or modifications not expressly approved
by the party responsible for compliance could void the
user's authority to operate this equipment.
• This product satisfies FCC regulations when shielded
cables and connectors are used to connect the unit to
other equipment.
To prevent electromagnetic interference with electric
appliances, such as radios and televisions, use shielded
cables and connectors for connections.
04 USING A WIRED
CONNECTION
Connecting using an HDMI to
Micro HDMI Cable
SERVICE
HDMI
HDMI IN (eARC)
HDMI to Micro
(ARC)
HDMI Cable
TV Rear of the
Soundbar
NOTE
• When using an HDMI to Micro HDMI cable, take caution
not to break the cable terminal.
• When the TV sound is not output, press the (Multi
Function) / (Source) button at the top of the
Soundbar or the (Source) button on the remote
control to select the "TV ARC" mode.
• The recommended cable is an HDMI cable certified by
HDMI.org.
Using the Q-Symphony Function
When the Soundbar connects to a Samsung TV that
supports the Q-Symphony function, you can play the sound
simultaneously through the Soundbar and the TV. If you use
SERVICE
DIGITAL AUDIO IN DIGITAL AUDIO IN (OPTICAL) (OPTICAL)
SERVICE
POWER ID SET ID SET HDMI IN 1 HDMI IN 1 HDMI 1
(WOOFER, REAR) HDMI 1
the Q-Symphony function, the surround sound played on
NETWORK
HDMI IN 2 HDMI IN 2 HDMI 2
(eARC/ARC) HDMI TO TV
(eARC/ARC) HDMI TO TV
the TV allows you to enjoy a richer, more three-dimensional
surround sound effect.
When the Soundbar is connected, "Q-symphony" menu
appears on the TV. (The message displayed may differ with
the TV model.)
(Settings ( ) → All Settings ( ) → Sound → Sound
Output)