Using The Boot Manager To Install Ipso - Nokia IP500 Series Installation Manual

7
Using the Boot Manager

Using the Boot Manager to Install IPSO

The form of the install command is:
install
Note
See the appropriate version of release notes for complete installation
procedures.
Caution
A full installation using the install command deletes the existing
database on the IP500 Series appliance.
To use the boot manager to install a new copy of the operating system (IPSO)
kernel, perform the following steps:
1. At the boot manager command prompt, enter:
BOOTMGR[0]>install
If you used the
password, the boot manager prompts you for your password before
allowing you to execute the
2. Enter the information the
address, the server IP address, and other information).
3. Reboot the IP500 Series appliance.
110
All manuals and user guides at all-guides.com
command to protect this command with a
passwd
install
install
command.
command requests (your system IP
IP500 Series Installation Guide