Bottom Shelf
1
Turn the bottom shelf upside down. Attach the front panel bottom shelf to the bottom shelf with
(8) M4x10 screws. (A)
Attach the casters to the bottom shelf with (16) M6x13 screws. (B)
Note: Install each caster into the correct position as shown in the figure below. The
standard caster (non-swiveling) will only install in one direction.
Turn the bottom shelf right side up. Attach the door magnets to the bottom shelf with (2)
M4x10 screws. (C)
Attach the tank holder to the bottom shelf as shown with (4) M6x13 screws. (C)
Note: The M6x13 screws for the tank holder brackets (24) are pre-installed to the tank
holder
brackets. Remove the pre-installed screws before installing the tank holder brackets to
the bottom shelf.
M6x13 Screw
Qty: 20 pcs
A
Swivel Caster with Brake
(Part No.: 40900212)
C
M4x10 Screw
Qty: 10 pcs
19
Swivel Caster
(Part No.: 40900213)
Standard Caster
(Part No.: 40900214)
B